Perlight PowerPlug MAX 465
A single 465W Perlight panel on an adjustable mount for wall, floor or balcony fixing, run by an APSystems EZ1-M 800W microinverter.
Listed Compliant on the ENA register
This kit meets the Plug-in Solar Device Interim Product Specification, so you can install it yourself and plug it into an ordinary socket. Register it free at myplugin.solar within 28 days of plugging it in.
PERLI/21158/V1 · Checked against the ENA Type Test Register on 28 September 2026. The rules, explained
PowerGuide is reader-supported. We may earn a commission from links on this page. It never affects our rankings or what we recommend. Learn more
Our verdict
The entry point into Plug In Solar's Perlight PowerPlug MAX range: one 465W panel on a mount rated for wall, floor or balcony fixing. Not bifacial, unlike the 500W and 1000W PowerPlug MAX kits alongside it. With a single panel, its capacity is well under the 800W output cap.
Good
- Mount rated for wall, floor or balcony fixing
- Sold direct by Plug In Solar
- Cheapest kit in the Perlight range
Watch out
- Not bifacial
- Panel capacity well under the 800W output cap
Specifications
| Panel capacity | 465 Wp |
|---|---|
| Panels | 1 |
| Max AC output | 800 W |
| Microinverter | APSystems EZ1-M 800W Dual Input Micro-Inverter |
| Mounting | Adjustable mount (wall, floor or balcony) |
| Bifacial panels | No |
| Cable length | 4 m |
| Warranty | 10 yrs |
| ENA register reference | PERLI/21158/V1 |